Last updated 2026-11-09
Unit converters
211 converters across 7 quantities. Each one works in both directions, shows the conversion factor and how it is defined, and gives a worked example and a reference table.
Choose a quantity
Length 61 converters
Metres, feet, inches, miles, nautical miles, typographic points and astronomical distances.
Area 15 converters
Square feet, square metres, acres, hectares and square miles.
Volume 45 converters
Litres, millilitres, cubic feet and US gallons, quarts, pints, cups and spoons.
Mass 26 converters
Kilograms, grams, pounds, ounces, stone, carats and the three kinds of ton.
Time 21 converters
Seconds through weeks, plus average months and Julian years.
Speed 15 converters
km/h, mph, metres and feet per second, knots and the speed of light.
Pressure 28 converters
Pascals, kPa, bar, millibar, psi, atmospheres and torr.
How the numbers are worked out
Every converter takes its factor from one registry of unit definitions, written the way the defining standard writes them: the inch as exactly 0.0254 m, the pound as exactly 0.453 592 37 kg, the US gallon as exactly 231 cubic inches. Conversion factors are then worked out as exact fractions rather than in floating point, so 1 inch comes out as 25.4 mm and not 25.399 999 999 999 995.
A few units cannot be written exactly in SI terms because they are measured (the Bohr radius) or involve π (the parsec). Those are flagged wherever they appear. See Editorial & corrections for our sources and how to report a mistake.
More units in the free API
The ConvertReference API covers 123 units in 12 quantities, including some that do not have converter pages yet:
- Temperature — 4 units
- Energy — 10 units
- Power — 6 units
- Force — 5 units
- Digital storage — 12 units
Calculators
For jobs that need more than one conversion — concrete for a slab, a stair stringer, voltage drop on a cable run — see the calculators, which show the formula, assumptions and a worked example.